Technical inquiry

  • 1. Brief description of the application (sketch)

  • 2. Dimensions

  • Shaft diameter (mm)
  • Bearing width (mm)
  • Bearing wall thickness (mm)
  • Flange diameter (mm)
  • Flange thickness (mm)

  • 3. Mating part

  • Diameter with tolerance (mm)
  • Material
  • Mean roughness Ra (µm)
  • Hardness (HRC)

  • 4. Housing

  • Diameter with tolerance (mm)
  • Material

  • 5. Operating conditions

  • Bearing load (N)
  • Sliding speed (m/s)

  • Type of motion

  • Rotating (rpm)
  • Pivoting angle (°)
  • Linear; Stroke length (mm)

  • Frequency (1/min)
  • Lubrication
    (dry, oil, grease or water):

  • Ambient temperature (°C)
  • Environmental
    media (z.B. acids, lye, etc.…)

  • 6. Special requirements

    e.g. certifications, friction, service life, etc.
  • Intermittent duty etc:
  • Ratio of idle to running time:

  • 7. Requirements

  • One-time (pieces)
  • Monthly (pieces)
  • Annually (pieces)

  • Company (Address)

    • Name
    		*
    Company
    		*
    Department
    Branch
    Street
    Zip, Town
    		*
    Country
    Tel.
    		*
    Fax
    E-Mail
    		*
    misc. message

    *required fields
    Powered By ChronoForms - ChronoEngine.com